Difference between revisions of "REST API GFMS"

From MyDewetra World
Jump to: navigation, search
(Use Case 4 - Retrieve a flood product)
 
(51 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[File:example7.jpg|right|100px|caption]]
 
[[GFMS | [Home]]] - [[DATA ACCESS | [Data access]]]
 
[[GFMS | [Home]]] - [[DATA ACCESS | [Data access]]]
 
----
 
----
  
hereafter REST API, to access, configure and analyse the products and all functionalities (see section 2.4.3.2 Module - User Management REST API and 2.4.3.4 Module – Products API), P113-114
+
This section is devoted to explain how [[INTRODUCTION | '''GFM''']]'s dissemination [https://en.wikipedia.org/wiki/API API] can be used to access and download flood products.
 +
The chapter is organized as follows:
 +
# how to get a list of all available product output layers together with their description
 +
# how to get a full list of the available [[PRODUCTS |product output layers]] for a specific ''AOI'' (e.g., Myanmar)
 +
# how to get all the [[PRODUCTS | product output layers]] for a specific ''AOI ''
 +
# how to retrieve a specific [[PRODUCTS | product output layer]] (e.g., [[S-1_Observed_Water_Extent | water_extent]]) 
 +
 +
[[INTRODUCTION | '''GFM''']]'s [https://en.wikipedia.org/wiki/API API] can be accessed at the following URL:
 +
[https://api.gfm.geoville.com/v1/  https://api.gfm.geoville.com/v1/]
 +
 
 +
For the authentication the following token can be used:
 +
Bearer Q8ajYGdedXVwtbqbkoHD4G1tTTja6PrXVxNgXnZTfL
 +
 
 +
In the following use cases this manual will make of use the terms '''products''' and '''output layers''':
 +
* an output layer is one of the eleven [[PRODUCTS | products]] delivered by the service
 +
* a product is the full set of all the 11 [[PRODUCTS | flood-related layers]]
 +
 
 +
 
 +
=='''Use Case 1 – Get all available output layer types for flood products'''== 
 +
The first use case shows how to get a list of all the available  [[PRODUCTS | output layer types]] together with their description. 
 +
Expand the
 +
 
 +
''''Therefore, please visit the /products/output_layer_types endpoint in the API documentation.''''
 +
To do that, users have to follow a four-step procedure:
 +
* Step 1: Select the endpoint  [[File: ep_product1.jpg | 500px]]
 +
* Step 2: Press the ''Try it out'' button  [[File: ep_product2.jpg | 100px]]
 +
* Step 3: Enter the access token
 +
* Step 4: Click the “Execute” Button [[File: ep_product3.jpg | 65px]]
 +
As a result, the API endpoint provides a list of all available output layers, the type of the layer and description:
 +
 
 +
[[File: ep_product4.jpg | 500px]]
 +
 
 +
=='''Use Case 2 – Get an Area of Interest (AOI)'''==
 +
The second use case is devoted to give users the details through which they can address all ''AOIs'''. After providing the access token, the endpoint provides a list of all stored '''AOIs'''. <br>
 +
To do that, users have to follow a four-step procedure:
 +
* Step 1: Select the endpoint  [[File: ep_product0.jpg | 350px]]
 +
* Step 2: Press the ''Try it out'' button  [[File: ep_product2.jpg | 100px]]
 +
* Step 3: Enter the access token
 +
* Step 4: Click the “Execute” Button [[File: ep_product3.jpg | 65px]]
 +
 
 +
In this tutorial the Myanmar AOI is used: 
 +
"aoi_id": "e289b746fa66c0bea2049a020aa38b0c9aacb8783c112117a9002ae035511bcb"
 +
"aoi_name": "Myanmar"
 +
 
 +
After finding out the ''aoi_id'' for Myanmar, another endpoint is used to get a list of all available [[PRODUCTS | products]] for this ''AOI''. 
 +
 
 +
 
 +
=='''Use Case 3 - Get all products for a specific AOI'''==
 +
This use case shows how to get a list of all the [[PRODUCTS | products]] available for a specific ''AOI''.  This endpoint requires the additional path parameter ''aoi_id'' (see the previous Use Case) to address a specific AOI (Myanmar, in the example). <br>
 +
 
 +
To do that, users have to follow a four-step procedure:
 +
* Step 1: Select the endpoint  [[File: ep_product-1.jpg | 500px]]
 +
* Step 2: Press the ''Try it out'' button  [[File: ep_product2.jpg | 100px]]
 +
* Step 3: Enter the access token
 +
* Step 4: Enter the extra parameters to define the query in a specific time range. In order to filter the response, this API endpoint provides the additional query parameter '''time'''. This parameter can assume three values:
 +
# '''latest''': returns the latest product for the AOI
 +
# '''all''': returns all products for the AOI
 +
# '''range''': returns all products within a specified date range. If applied, two additional query parameters (''to'', ''from'') are required. Please use the format '''YYYY-MM-DDTHH:MM:SS''' to enter a valid date.
 +
 
 +
* Step 5: Click the “Execute” Button [[File: ep_product3.jpg | 65px]]
 +
 
 +
The service returns a list of all products that match the filter criteria. In particular, the endpoint provides a '''product_id''' and a timestamp ('''product_time''') for each product. <br>
 +
In the example:
 +
"product_id": 5
 +
"product_time": "2019-08-16T11:40:09"
 +
 
 +
 
 +
=='''Use Case 4 - Retrieve a flood product'''==
 +
This use case describes how to access a specific [[PRODUCTS | output layer]] (in the example: the [[S-1_Observed_Water_Extent | water extent]] layer). <br>
 +
To do that, users have to follow a four-step procedure:
 +
* Step 1: Select the endpoint  [[File: ep_product-2.jpg | 500px]]
 +
* Step 2: Press the ''Try it out'' button  [[File: ep_product2.jpg | 100px]]
 +
* Step 3: Enter the access token
 +
* Step 4: Enter the extra parameters
 +
** '''product_id''': the unique product identifier (e.g.: product_id: 5)
 +
** '''layer_name''': the actual [[PRODUCTS | output layer]] the query is about (e.g.: the [[S-1_Observed_Water_Extent | water extent]] )
 +
As a result, the user gets a more detailed product description. This description consists of the following information:
 +
* product_id: Unique product identifier
 +
* layer_name: names of the [[PRODUCTS | output layer]]
 +
 +
Please note that a comprehensive list of the paramaters defining the [[PRODUCTS | output layer]] is given below:
 +
* layer_type: Layer type (raster or vector)
 +
* timestamp: Product date information
 +
* url_data: URL to download the product
 +
* url_tiles: URL to access the tile information 
 +
that, in the given example  (Myanmar / water_extent) will look like:
 +
* product_id: 5
 +
* layer_name: water_extent
 +
* layer_type: raster
 +
* Timestamp: 2019-08-16T11:40:09",
 +
* url_data: https://demo.geoville.com/jrc_gfm_demo/data/OL2_Observed_Water_Extent_Myanmar.tif
 +
* url_tiles: https://tileserver.geoville.com/jrc-gfms/OL2_S1_OWE_Myanmar/{z}/{x}/{y}.png
 +
 
 +
 
 +
===API Specifications - Overview===
 +
 +
{| class="wikitable" style="text-align: center;
 +
| align="center" style="background:#f0f0f0;"|'''GFM product output layer'''
 +
| align="center" style="background:#f0f0f0;"|'''Product data format'''
 +
| align="center" style="background:#f0f0f0;"|'''Endpoint (latest observation)'''
 +
|-
 +
| flood_extent || Product output layers - Raster data || /v1/flood_extent/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| reference_water_mask||Product output layers - Raster data||/v1/water_mask/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| [[S-1_Observed_Water_Extent | water_extent]] ||Product output layers - Raster data||/v1/water_extent/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| exclusion_mask||Product output layers - Raster data||/v1/exclusion_mask/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| uncertainty_values||Product output layers - Raster data||/v1/uncertainty_values /{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| advisory_flags||Product output layers - GeoJSON data||/v1/advisory_flags/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| sentinel-1_metadata||Product output layers - GeoJSON data||/v1/sentinel-1_metadata/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| sentinel-1_footprint||Product output layers - GeoJSON data||/v1/sentinel-1_footprint/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| sentinel-1_schedule||Product output layers - GeoJSON data||/v1/sentinel-1_schedule/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| affected_population||Product output layers - Raster data||/v1/affected_population/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
| affected_landcover||Product output layers - Raster data||/v1/affected_landcover/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 +
|-
 +
|
 +
|}
 +
 
  
  
 
----
 
----
 
[[GFMS | [Home]]] - [[DATA ACCESS | [Data access]]]
 
[[GFMS | [Home]]] - [[DATA ACCESS | [Data access]]]

Latest revision as of 08:43, 13 July 2021

caption

[Home] - [Data access]


This section is devoted to explain how GFM's dissemination API can be used to access and download flood products. The chapter is organized as follows:

  1. how to get a list of all available product output layers together with their description
  2. how to get a full list of the available product output layers for a specific AOI (e.g., Myanmar)
  3. how to get all the product output layers for a specific AOI
  4. how to retrieve a specific product output layer (e.g., water_extent)

GFM's API can be accessed at the following URL:

https://api.gfm.geoville.com/v1/

For the authentication the following token can be used:

Bearer Q8ajYGdedXVwtbqbkoHD4G1tTTja6PrXVxNgXnZTfL 

In the following use cases this manual will make of use the terms products and output layers:


Use Case 1 – Get all available output layer types for flood products

The first use case shows how to get a list of all the available output layer types together with their description. Expand the

'Therefore, please visit the /products/output_layer_types endpoint in the API documentation.' To do that, users have to follow a four-step procedure:

  • Step 1: Select the endpoint Ep product1.jpg
  • Step 2: Press the Try it out button Ep product2.jpg
  • Step 3: Enter the access token
  • Step 4: Click the “Execute” Button Ep product3.jpg

As a result, the API endpoint provides a list of all available output layers, the type of the layer and description:

Ep product4.jpg

Use Case 2 – Get an Area of Interest (AOI)

The second use case is devoted to give users the details through which they can address all AOIs'. After providing the access token, the endpoint provides a list of all stored AOIs.
To do that, users have to follow a four-step procedure:

  • Step 1: Select the endpoint Ep product0.jpg
  • Step 2: Press the Try it out button Ep product2.jpg
  • Step 3: Enter the access token
  • Step 4: Click the “Execute” Button Ep product3.jpg

In this tutorial the Myanmar AOI is used:

"aoi_id": "e289b746fa66c0bea2049a020aa38b0c9aacb8783c112117a9002ae035511bcb" 
"aoi_name": "Myanmar" 

After finding out the aoi_id for Myanmar, another endpoint is used to get a list of all available products for this AOI.


Use Case 3 - Get all products for a specific AOI

This use case shows how to get a list of all the products available for a specific AOI. This endpoint requires the additional path parameter aoi_id (see the previous Use Case) to address a specific AOI (Myanmar, in the example).

To do that, users have to follow a four-step procedure:

  • Step 1: Select the endpoint Ep product-1.jpg
  • Step 2: Press the Try it out button Ep product2.jpg
  • Step 3: Enter the access token
  • Step 4: Enter the extra parameters to define the query in a specific time range. In order to filter the response, this API endpoint provides the additional query parameter time. This parameter can assume three values:
  1. latest: returns the latest product for the AOI
  2. all: returns all products for the AOI
  3. range: returns all products within a specified date range. If applied, two additional query parameters (to, from) are required. Please use the format YYYY-MM-DDTHH:MM:SS to enter a valid date.
  • Step 5: Click the “Execute” Button Ep product3.jpg

The service returns a list of all products that match the filter criteria. In particular, the endpoint provides a product_id and a timestamp (product_time) for each product.
In the example:

"product_id": 5 
"product_time": "2019-08-16T11:40:09" 
 

Use Case 4 - Retrieve a flood product

This use case describes how to access a specific output layer (in the example: the water extent layer).
To do that, users have to follow a four-step procedure:

  • Step 1: Select the endpoint Ep product-2.jpg
  • Step 2: Press the Try it out button Ep product2.jpg
  • Step 3: Enter the access token
  • Step 4: Enter the extra parameters
    • product_id: the unique product identifier (e.g.: product_id: 5)
    • layer_name: the actual output layer the query is about (e.g.: the water extent )

As a result, the user gets a more detailed product description. This description consists of the following information:

* product_id: Unique product identifier 
* layer_name: names of the  output layer 

Please note that a comprehensive list of the paramaters defining the output layer is given below:

* layer_type: Layer type (raster or vector) 
* timestamp: Product date information 
* url_data: URL to download the product 
* url_tiles: URL to access the tile information  

that, in the given example (Myanmar / water_extent) will look like:

* product_id: 5 
* layer_name: water_extent 
* layer_type: raster 
* Timestamp: 2019-08-16T11:40:09", 
* url_data: https://demo.geoville.com/jrc_gfm_demo/data/OL2_Observed_Water_Extent_Myanmar.tif 
* url_tiles: https://tileserver.geoville.com/jrc-gfms/OL2_S1_OWE_Myanmar/{z}/{x}/{y}.png 
 

API Specifications - Overview

GFM product output layer Product data format Endpoint (latest observation)
flood_extent Product output layers - Raster data /v1/flood_extent/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
reference_water_mask Product output layers - Raster data /v1/water_mask/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
water_extent Product output layers - Raster data /v1/water_extent/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
exclusion_mask Product output layers - Raster data /v1/exclusion_mask/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
uncertainty_values Product output layers - Raster data /v1/uncertainty_values /{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
advisory_flags Product output layers - GeoJSON data /v1/advisory_flags/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
sentinel-1_metadata Product output layers - GeoJSON data /v1/sentinel-1_metadata/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
sentinel-1_footprint Product output layers - GeoJSON data /v1/sentinel-1_footprint/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
sentinel-1_schedule Product output layers - GeoJSON data /v1/sentinel-1_schedule/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
affected_population Product output layers - Raster data /v1/affected_population/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
affected_landcover Product output layers - Raster data /v1/affected_landcover/{​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​roi-id}​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​



[Home] - [Data access]